| Product Photo |
Products |
Unit Price |
 |
Tri-Custom Manufacturing 12 in. x 12 in. x 59 in. Stackable Pillar
The TCM Pre-formed Stackable Pillar stands 12 in. x 12 in. x 59 in. It is formed with heavy wall MDPE and creates the look of genuine river rock without the hassle. |
$199.95 |
 |
Tri-Custom Manufacturing 12 in. x 12 in. x 59 in. Stackable Pillar with Steel Post
The Pre-Formed Stackable Pillar is intended to be placed over a structural post and filled with concrete. The included structural post is constructed of steel. |
$324.95 |
 |
Tri Custom Manufacturing 21 in. x 21 in. x 15 ½ in. Stack Pillar Section
The TCM Pre-formed Stack Pillar Section stands 21 in. x 21 in. x 15 ½ in. It is formed with heavy wall MDPE and creates the look of genuine ledge stone without the hassle. |
$116.28 |
 |
Gate Crafters Z-Lock (ZL2-KSA)
This revolutionary latch is made of a super strong polymer and stainless steel. Meets Federal ADA standards. Easy installations requires no special tools or jigs |
$70.68 |
 |
Gate Crafters, Deluxe Lock Latch
The Lokk-Latch® Deluxe is a high quality security and privacy gate latch for general-purpose gates. Special, longer side-fixing legs on this model provide extra strength and easy fitting alignment |
$60.99 |
 |
Gooseneck Keypad/Intercom Stands
Three (3) different plate sizes available for different devices. The GateCrafters.com keypad stand is made from 6060-T6 wrought aluminum to last you years to come. The 9" of clearance from the face of the stand to the face of the plate allows plenty of room for cars to pull up and not scratch their finish on the post.
|
$59.95 |
 |
Universal Ball Bearing Hinge Kit (BH MADJ)
Universal Ball Bearing Hinge Kit. Kit includes one pair of hinges.
Hinge Barrel Dimensions: H 2 3/8", W 1", D 1 1/4"
J Bolt Dimensions: 4 1/2" Threading, 5/8" Diameter
|
$16.95 |
 |
Tri Custom Manufacturing 12 in. x 12 in. x 17 3/8 in. Pillar Riser
The TCM Pre-formed Pillar Riser stands 12 in. x 12 in. x 17 3/8 in. It is intended to be used with the 12 in. x 12 in. x 59 in. Stackable Pillar and is perfect for fence heights that exceed average height and can accommodate a maximum fence height of 6 feet. |
$61.20 |
 |
Tri Custom Manufacturing 21 in. x 21 in. x 46 in. Stackable Pillar with 4 in. x 4 in. x 10 ft. tall Steel Post
The Pre-Formed Stackable Pillar is intended to be placed over a structural post and filled with concrete. The included structural post is constructed of steel. |
$474.95 |
 |
Tri Custom Manufacturing 21 in. x 21 in. x 46 in. Stackable Pillar
The TCM Pre-formed Stackable Pillar stands 21in. x 21 in. x 46 in. It is formed with heavy wall MDPE and creates the look of genuine ledge stone without the hassle. |
$199.95 |
 |
Tri Custom Manufacturing 21 in. x 21 in. x 46 in. Stackable Pillar with 3 in. x 3 in. x 8 ft. tall Steel Post
The Pre-Formed Stackable Pillar is intended to be placed over a structural post and filled with concrete. The included structural post is constructed of steel. |
$324.95 |
 |
Universal Ball Bearing Hinge Kit w/ Hinge Plates for Round Post (BH MADJ Plates Round)
Universal Ball Bearing Hinge Kit w/ Hinge Plates. The back of the plate has a recess to accomodate round posts. Kit includes one pair of hinges. Hinge Barrel Dimensions: H 2 3/8", W 1", D 1 1/4" J Bolt Dimensions (not pictures but isincluded): 4 1/2" Threading, 5/8" Diameter. Plate Dimensions 8" x 1 1/2" |
$54.99 |
 |
Universal Ball Bearing Hinge Kit w/ Hinge Plates (BH MADJ Plates)
Universal Ball Bearing Hinge Kit w/ Hinge Plates. Kit includes one pair of hinges. Hinge Barrel Dimensions: H 2 3/8", W 1", D 1 1/4" J Bolt Dimensions (not pictures but isincluded): 4 1/2" Threading, 5/8" Diameter. Plate Dimensions 8" x 1 1/2" |
$49.99 |
 |
GateCrafters 16 Guage, 2 Conductor, 500' Roll(2A-16 500)
16 guage, 2 conductor, stranded low voltage wire needed for running power and most accessories.
|
$167.50 |
 |
Gate Crafters 14 guage, 2 Conductor , 1000' Roll(2A-14 02)
14 guage, 2 conductor, stranded low voltage wire needed for running power and most accessories. |
$248.00 |
 |
Gate Crafters 14 Guage, 2 Conductor, 500' Roll(2A-14 02)
14 guage, 2 conductor, stranded low voltage wire needed for running power and most accessories. |
$134.00 |
 |
Gate Crafters 12 Guage, 2 Conductor, 1000' Roll(2A-12 02)
12 guage, 2 conductor, stranded low voltage wire needed for running power and most accessories. |
$352.00 |
 |
Gate Crafters 12 Guage, 2 Conductor, 500' Roll(2A-12 02)
12 guage, 2 conductor, stranded low voltage wire needed for running power and most accessories. |
$186.00 |
 |
Gate Crafters 10 Guage, 2 Conductor, 1000" Roll(2A-10 02)
10 guage, 2 conductor, stranded low voltage wire needed for running power and most accessories. |
$536.00 |
 |
GateCrafters 16 Guage, 2 Conductor, 1000' Roll(2A-16 1000)
16 guage, 2 pair, stranded low voltage wire needed for running power and most accessories.
|
$329.00 |
 |
Gate Crafters Drop Rod (LB124BX-KSA)
Featuring a rugged stainless steel and reinforced fiberglass construction this latch is not only functional and looks good |
$58.95 |
 |
Gate CraftersLock Bolt Drop Rod for Vinyl (LB124BXWT-KSA)
This gem of a drop rod will fix that problem. Featuring a rugged stainless steel and reinforced fiberglass construction this latch is not only functional and looks good, but can also be keyed alike to most house doors. Kwik-set key way |
$58.95 |
 |
Reinforcement Brackets (GP161229)
Brackets generally used on farm tube style gates at the point where the operator will be mounted to.
|
$19.95 |
 |
9" in Height 3x3 Angle Iron (AI)
The Angle Iron can be bolted or welded to the outside edge of any flat post to extend the width of the post for mounting purposes.
|
$12.00 |
 |
Apollo Bolt Mounting Kit (446)
This bolt mounting kit allows the Apollo 1550 or 1650 to be bolted on instead of the standard weld installation.
|
$41.92 |
 |
4' in Height 3x3 Secondary Gate Opener Mounting Post (4'x3"x3" Post)
The Secondary Mounting Post allows for addition placement options for the post-mounting bracket. The post comes finished in flat black with a top post cap.
|
$35.00 |
 |
UniSolar 32 Watt Solar Lighting System (UNI-KIT 30)
The UNI-KIT® is a durable lighting system providing extended lighting hours. Simple plug-in connections make it easy to install.
|
$429.00 |
 |
Morningstar Sunguard-4 Solar Controller (SunGuard4)
Efficiently uses the solar energy to fully recharge the battery.
|
$30.00 |
 |
Miller Edge Gate Bumper- 5 ft (GB0101-5)
The extrusion is designed to provide a flexible cushion to the leading or trailing edge of a 2" gate frame. It easily attaches to the gate by inserting screws through the mounting flange and into the gate frame. (Screws are not included)
|
$39.95 |
 |
Miller Edge Gate Bumper- 6 ft (GB0101-6)
The extrusion is designed to provide a flexible cushion to the leading or trailing edge of a 2" gate frame. It easily attaches to the gate by inserting screws through the mounting flange and into the gate frame. (Screws are not included)
|
$45.95 |
 |
Miller Sensing Edge 5 feet (MGS20B2U5)
The sensing edge offers 3-sided activation for an added measure of protection. When touched, these electrically activated edge sensors immediateley signal the gate operator to stop and reverse.
|
$199.00 |
 |
Pair of 4" Steel Ball Bearing V Groove Wheels for Sliding Gates (WHL-4-C)
Cold roll steel V-Groove wheel.
Designed to be maintenance free.
Sealed Ball Bearings.
Designed for high traffic commercial sliding gate track applications.
4": two 2" sealed bearings with 4"x.5" bolt with nut - 4"h x 1.75"w - 1,000 lbs.
|
$39.95 |
 |
Rubberized Hard Plastic Sliding Gate Roller Guide with Bracket
Heavy duty bolt on or weld on bracket.
Uses 1/8 thick x 3 1/4" tall C bracket for mounting.
Sealed ball bearings for smooth rolling.
3" or 12" tall, 2.25" diameter
2.75" offset from mounting surface
|
$23.95 |
 |
Roller Assembly for 2" thick sliding gates
Heavy duty bolt on guide or weld on bracket.
Sealed ball bearings for smooth rolling.
2) rollers: 3" or 12" tall, 2.25" diameter
3" offset from mounting surface - can be customized by request at no charge
|
$72.95 |
 |
Roller / post assembly for any width sliding gate
Heavy duty bolt on or weld on guide bracket.
Uses 1/8 thick x 3 1/4" tall C bracket for mounting on both sides and comes with a 3"x3"x8' post for second roller
Sealed ball bearings for smooth rolling.
2) rollers: 3" or 12" tall, 2.25" diameter
2.75" offset from mounting surface - can be customized by request at no charge
|
$99.95 |
 |
Mar-Hyde Single Stage Self Etching Primer: 19oz Aresol Can (#5111)
Mar-Hyde Single Stage Self Etching Primer: 19oz Aresol Can
|
$15.95 |
 |
Mar-Hyde Single Stage Self Etching Primer: 1 Gallon (#5113)
Mar-Hyde Single Stage Self Etching Primer: 1 Gallon
|
$59.95 |
 |
RUST-OLEUM Ultra-Flat Black Paint: 1 Gallon
Rust-Oleum Ultra-Flat Black Paint
|
$39.95 |
